Thermal Expansion/Contraction Issues

A few writings regard the initial two things as a similar impact. All things considered, if the coefficients of the development of the gage and the thing under test are the same, they will contract or grow at similar rates in light of a temperature change. For this situation, an adjustment in system temperature would not bring on any adjustment in the demonstrated strain, with the exception of that in view of the gage's temperature coefficient of resistance.
It's essential to note that in a few applications, it might be alluring or even important that strain incited by temperature changes be noted. Imagine an application where a "hot segment" turbine cutting edge is being tried to guarantee appropriate freedom between the sharp edge tip and the encompassing cover. It's critical to know how much the cutting edge has stretched based upon temperature notwithstanding the radial compels of revolution. Then again, if the parameter of intrigue is truly stress or its nearby relative, constraint, any strain brought about by temperature changes would incite a genuine error in the outcome.
A strain gage used to quantify the "g" drives on a supersonic airplane wing skin may see temperatures from - 45°C to 200 °C. In the event that the g-compel data was basic to not overemphasizing the wing, you'd positively not need critical temperature-initiated error. In a more straightforward case, the heap cell used to quantify the drive set on a postal scale ought not to actuate errors basically on the grounds that the scale is alongside the window on a sunny summer day! Most applications fall into the second class, where the key estimation parameter is truly stretch, and the perfect system would be not to perceive any progressions brought on by warm extension or compression.
Like most building difficulties, there is more than one approach to skin this notorious feline.
They are:

1. Calculate the error and dispense with it numerically, 
2. Match the strain gage to the section, 
3. Use an indistinguishable strain gage in another leg of the extension.